Installing an Indoor Sprint Track Flooring

Over the course of 2 weeks, White Line Services installed a new blue athletic track surface to a school in Dorset. The below pictures demonstrate the stages of the installation, starting with the initial screeding of the concrete flooring to iron out any minor defects and improve overall levels.

Once this layer had set, the next step was to install the base layer 10mm rubber shock pad that ran the length of the area.

Once the base mat layer has been successfully stuck down, the sealer coat layer was applied and left to cure, as shown below.

Then finally, the top layer 3mm flowcoat system was applied and left to cure. Once any excess EPDM granules had been swept away, the surface was then ready for painting. Below you can see the finished blue 3 lane sprint track.